怎么解决Windows下0xc0000005错误

Error Code 0xc0000005 could be caused by several reasons in a Windows PC like damaged or low RAM, malware infection, corrupt registry files, wrong hardware configuration, etc. It’s one of the most commonly seen error that pops up in a Windows system mainly in three different situations, 错误代码0xc0000005可能是由于Windows PC损坏或内存不足，恶意软件感染，注册表文件损坏，硬件配置错误等多种原因引起的。它是Windows系统中最常见的错误之一，主要是三个不同情况

Windows Installation Error

The error halts the Windows OS installation and is mostly related to temporary hardware issues with the RAM or corrupt hard drive due to bad sectors.
Error: Windows installation encountered an unexpected error ….

Windows安装错误

该错误会停止Windows OS安装，并且主要与RAM临时硬件问题或由于坏扇区导致的硬盘驱动器损坏有关。
错误： Windows安装遇到意外错误……。

 

Access Violation Error

The error occurs when a program in Windows attempts to access a location or data from a location that is not assigned to it. This can occur with any Windows application due to registry issue, faulty RAM, corrupt drivers, virus infection, or incorrect security update, etc.
Error: Exception: Access violation error (0xc0000005) at ….

访问冲突错误

当Windows中的程序尝试从未分配给该位置的位置或数据中访问该位置或数据时，会发生此错误。由于注册表问题，错误的RAM，损坏的驱动程序，病毒感染或不正确的安全更新等，任何Windows应用程序都可能发生这种情况。
错误：异常：…的访问冲突错误（0xc0000005）。

 

Application unable to start

The error pops up when you launch a program installed on your Windows PC such as Mozilla, VLC, Chrome browser, game, etc. Mostly, re-installation doesn’t help in fixing the issue as it’s caused by some invalid, unsigned, or incomplete DLL files that helps software to run on Windows platform.
Error: The application was unable to start correctly (0xc0000005)

应用程序无法启动

当您启动Windows PC上安装的程序（例如Mozilla，VLC，Chrome浏览器，游戏等）时，会弹出错误消息。通常，重新安装无济于事，因为它是由无效，未签名或其他原因引起的。不完整的DLL文件，可帮助软件在Windows平台上运行。
错误：应用程序无法正确启动（0xc0000005）

 

The error code 0xc0000005 can lead to data loss, either directly or indirectly, if not solved quickly. However, worry not in-case of data loss. Download Stellar Data Recovery software for a quick recovery of your lost data.

如果无法快速解决，错误代码0xc0000005可能直接或间接导致数据丢失。但是，不必担心数据丢失。下载Stellar Data Recovery软件，以快速恢复丢失的数据。

The error could also pop up when you try to install Windows updates. However, you don’t need to panic when you get these errors as they can be easily solved and you are not the first or only one to get this error.当您尝试安装Windows更新时，该错误也可能弹出。但是，当您遇到这些错误时，您不必惊慌，因为它们很容易解决，您不是第一个或唯一一个遇到此错误的人。

Did You Know: Data can be recovered even from corrupt Windows PC, putting you at risk of breach. So wipe clean your PC and also delete undeletable files to secure total privacy. Here’s how.您是否知道：即使从损坏的Windows PC上也可以恢复数据，从而使您有遭受破坏的危险。因此，请擦净您的PC并删除无法删除的文件以保护总体隐私。就是这样。

1. Check RAM

Turn off the system and replace the RAM with other RAM. You may also swap RAM slots and then boot the system. Check if the error still persists. Swapping of RAM is required when there is a physical damage to RAM connectors or hardware.

Also, run a memory diagnostic test on your RAM using Memtest86+ to fix the issue.

1.检查RAM

关闭系统电源，然后用其他RAM替换RAM。您也可以交换RAM插槽，然后引导系统。检查错误是否仍然存在。如果RAM连接器或硬件受到物理损坏，则需要交换RAM。

另外，使用Memtest86 +在您的RAM上运行内存诊断测试以解决此问题。

2. Fix Registry

Corrupt registry files lead to serious issues in the system including this error code. If you have a backup of your registry files, you can restore your system’s registry and fix the problem. However, modifying registry files is a bit complex and can be dangerous for the system. Any invalid or improper alteration can lead to serious system consequences. Therefore, backup your current registry files before making any change. To fix registry, perform the following steps:

2. 修复注册表

损坏的注册表文件会导致系统严重问题，包括此错误代码。如果您有注册表文件的备份，则可以还原系统的注册表并解决问题。但是，修改注册表文件有点复杂，可能会对系统造成危险。任何无效或不当的更改都可能导致严重的系统后果。因此，在进行任何更改之前，请备份当前的注册表文件。要修复注册表，请执行以下步骤：

• Press ‘Windows + R’, type regedit, and hit ‘Enter’
• Navigate to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
• Double click LoadAppInit_DLLs and modify the value from 1 to 0
• Click ‘OK’ to confirm the changes
• Close the Registry Editor Window and restart the system
• 按“ Windows + R”，键入regedit，然后按“ Enter”
• 导航到HKLM \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Windows \ AppInit_Dlls
• 双击LoadAppInit_DLLs并将值从1修改为0
• 点击“确定”确认更改
• 关闭注册表编辑器窗口，然后重新启动系统

Check if the error still pops up when you try to launch an application.尝试启动应用程序时，检查错误是否仍然弹出。

3. Run SFC

SFC or System File Checker can help fix Windows system file corruption that might be causing this error. Running SFC scan is easy,

• Press Windows key and type cmd
• Right-click on ‘Command Prompt’ and choose ‘Run as Administrator’. A command prompt window appears
• Type sfc /scannow and hit Enter key
• Let the SFC scan to finish (It will automatically detect corrupt system files and will replace them with new from the cache)

• SFC或系统文件检查器可以帮助修复可能导致此错误的Windows系统文件损坏。运行SFC扫描很容易，

  • 按Windows键并键入cmd
  • 右键单击“命令提示符”，然后选择“以管理员身份运行”。出现命令提示符窗口
  • 输入sfc / scannow并按Enter键
  • 让SFC扫描完成（它将自动检测损坏的系统文件，并用缓存中的新文件替换它们）

4. Turn off DEP

DEP or Data Execution Prevention is a Windows in-built system-level memory protection feature that protects your system from damage caused by viruses and other security threats. However, some programs are not compatible with DEP feature in Windows and cause a 0xc0000005 error. To turn DEP off,

4. 关闭DEP

DEP或数据执行保护是Windows内置的系统级内存保护功能，可保护您的系统免受病毒和其他安全威胁造成的损害。但是，某些程序与Windows中的DEP功能不兼容，并导致0xc0000005错误。要关闭DEP，

• Sign in to Windows as Administrator
• Press ‘Windows+R’ and type sysdm.cpl. Hit Enter
• Click ‘Advanced’ tab and then click the ‘Settings’ button
• Click on Data Execution Protection tab and click ‘Turn on DEP for all programs and services except those I select’
• Click ‘Add’ button and then browse and add all the executable (.exe) files that are causing the issue
• Click ‘OK’
• Restart the system and try running the programs
• 以管理员身份登录Windows
• 按“ Windows + R”并键入sysdm.cpl。按下Enter
• 单击“高级”选项卡，然后单击“设置”按钮
• 单击“数据执行保护”选项卡，然后单击“为我选择的所有程序和服务打开DEP”
• 单击“添加”按钮，然后浏览并添加引起问题的所有可执行文件（.exe）。
• 点击“确定”
• 重新启动系统并尝试运行程序

5. Run CHKDSK Utility

A corrupt hard drive or bad sectors on the drive can also lead to error code 0x0000005. You can run CHKDSK (check disk) utility to try to fix the disk corruption due to bad sectors.

Open command prompt in administrator mode and type chkdsk X: /f /r where X is the hard drive letter that needs repair and hit ‘Enter’ key.

5. 运行CHKDSK实用程序

硬盘驱动器损坏或驱动器上的坏扇区也可能导致错误代码0x0000005。您可以运行CHKDSK（检查磁盘）实用程序来尝试修复由于坏扇区而导致的磁盘损坏。

在管理员模式下打开命令提示符，然后键入chkdsk X：/ f / r其中X是需要修复的硬盘驱动器号，然后按Enter键。

6. Use Hardware Troubleshooter

• Press Windows key, type Troubleshooting in Search Bar and press Enter
• In Windows 8 and later, click on ‘View All’ in the top left corner to display all built-in troubleshooters and then click on ‘Hardware and Devices’ to run the troubleshooter
• In Windows 10, scroll down and click on ‘Hardware and Devices’ and click ‘Run the troubleshooter’
• Wait for the troubleshooter to find the fixes. Click ‘Apply fixes’ and then restart the system

• 6. 使用硬件疑难解答

  • 按Windows键，在搜索栏中键入“疑难解答”，然后按Enter
  • 在Windows 8及更高版本中，单击左上角的“查看全部”以显示所有内置的疑难解答程序，然后单击“硬件和设备”以运行疑难解答程序
  • 在Windows 10中，向下滚动并单击“硬件和设备”，然后单击“运行疑难解答”
  • 等待疑难解答找到修补程序。单击“应用修补程序”，然后重新启动系统

7. Update Disk Drivers or Re-install them

Most probably, your system already has the latest driver. However, if you are facing any issue with the device, updating device driver fixes most of it and will ensure that your system has the latest fix for errors and bugs.

• Click ‘Windows’ key, type Device Manager and click on ‘Device Manager’
• Double-click on the Disk Drives and then right-click on the drive where the Windows and other programs are installed
• Choose Update Driver and then click Search automatically for updated driver software in the Update Driver dialog box
• Wait till Windows finds the driver. If it doesn’t find a new driver, download it from your disk manufacturer’s site and update by clicking on Browse my computer for driver software in the Update Drivers dialog box

If updating drivers doesn’t help, try re-installing the drivers. Right-click on disk and choose to ‘Uninstall device’ and then restart the system. Windows automatically re-installs drivers.

7. 更新磁盘驱动程序或重新安装它们

您的系统很可能已经具有最新的驱动程序。但是，如果您面临设备的任何问题，更新设备驱动程序将修复大多数问题，并将确保您的系统具有针对错误和错误的最新修复程序。

• 单击“ Windows”键，键入设备管理器，然后单击“设备管理器”
• 双击磁盘驱动器，然后右键单击安装Windows和其他程序的驱动器
• 选择“更新驱动程序”，然后在“更新驱动程序”对话框中单击“自动搜索更新的驱动程序软件”。
• 等到Windows找到驱动程序。如果找不到新的驱动程序，请从磁盘制造商的站点下载该驱动程序，然后在“更新驱动程序”对话框中单击“浏览我的计算机以获取驱动程序软件”进行更新。

如果更新驱动程序无济于事，请尝试重新安装驱动程序。右键单击磁盘，然后选择“卸载设备”，然后重新启动系统。Windows自动重新安装驱动程序。

8. Restore System or Use a Data Recovery Tool

System Restore is the last option that can help you fix the error code 0xc0000005. However, System Restore works only when your system has an available restore point before the error occurred.

If no Restore Point is available on your system, take the help of a data recovery tool and recover lost or inaccessible data from a corrupt or damaged hard drive due to bad sectors in your system. Stellar Data Recovery- Standard is one such data recovery tool that can help you recover data from a severely corrupt, damaged, inaccessible, formatted, and even from the re-formatted hard drive with just a few clicks.

8. 还原系统或使用数据恢复工具

系统还原是可以帮助您修复错误代码0xc0000005的最后一个选项。但是，“系统还原”仅在系统在错误发生之前有可用的还原点时才起作用。

如果系统上没有可用的还原点，请借助数据恢复工具来恢复由于系统坏道而从损坏或损坏的硬盘驱动器中丢失或无法访问的数据。Stellar Data Recovery- Standard是一种这样的数据恢复工具，只需单击几下，即可帮助您从严重损坏，损坏，无法访问，格式化甚至从重新格式化的硬盘驱动器中恢复数据。

Conclusion

Error code 0xc0000005 can be easily prevented by implementation of antivirus software, Scheduled CHKDSK scans, S.M.A.R.T. disk monitoring system, scheduled RAM diagnostics, and by updating system with the latest available Windows updates. However, due to this or any other error, if you ever face a data loss situation, use a reliable and trusted data recovery tool such as Stellar Data Recovery- Standard.

Stellar Data Recovery- Standard for Windows is an easy to use Windows data recovery software to get back lost documents, emails, photos, videos & many more from HDD, USB, Memory Card etc.

结论

可以通过实施防病毒软件，计划的CHKDSK扫描，SMART磁盘监视系统，计划的RAM诊断以及使用最新的Windows更新更新系统来轻松防止错误代码0xc0000005。但是，由于此错误或任何其他错误，如果您遇到数据丢失的情况，请使用可靠且受信任的数据恢复工具，例如Stellar Data Recovery-Standard。

恒星数据恢复-Windows的标准版是一种易于使用的Windows数据恢复软件，可从硬盘，USB，存储卡等中找回丢失的文档，电子邮件，照片，视频等。